GL-E8010U-B-type ONU products fully comply IEEE 802.3-2005 and China Telecom EPON equipment technical requirements V2.1, with carrier-class operational, management, and easy to maintain, as a bridge-type home side equipment, through EPON technology home / SOHO users over broadband access. Its interface has linked via fiber and central office equipment on a PON. Compact, desktop support placement, wall or placed in the corridor message box. Product Features:?? Conform IEEE802.3-2005 standards. ? ?? Support Ethernet service layer switching and wire-speed forwarding business down the line. ? ?? Support frame filtering and suppression. ? ?? Supports standard 802.1Q Vlan, support VLAN translation. ? ?? Supports 4094 VLAN (802.1Q). ? ?? Supports dynamic bandwidth allocation (DBA). ? ?? Supports QoS, including traffic classification, priority marking, queuing and scheduling, traffic shaping and traffic control and so on. ? ?? Supports I高标准 Snooping. ? ?? Ethernet port speed, loop detection, two-story isolation. ? ?? Support power failure alarm. ? Support for remote reset and restart function? Support function to restore the factory parameters? Support data encryption? Support state detection and fault reporting functions? Support Power lightning and lightning protection service ports. Port characteristics: the interface in order from left to right are:? PON port: connect via fiber optic cable source OLT equipment RJ45 port:? Twisted pair connected by the user side equipment at a rate of 10/100 / 1000M adaptive reset button:? Restoration The factory default, hold down the hole with a needle more than 3 seconds, the system will restore the factory default power switch:? You can when not in use, turn off the device to save energy power interface:? connect external power optical properties:> Support wave division multiplexing Two-way (Triplexer) transmission technology monofilament> interface type: SC / PC> maximum splitting ratio: 1:32> rate: up and down symmetric 1.25Gbps> transmission wavelength: 1310 nm> receiving wavelength: 1490 nm> output optical power : -1 ~ + 4dBm> Receiver sensitivity: maximum distance between the OLT and ONU supports 20 km Other features: Certification: Complies with CE, FCC, ROHS and other standards EMC / EMI: meet the VCCI Class B, FCC Part 15 B standard safety: comply with UL 60950 safety norms lightning surge voltage protection: meet ITU-T K.21 standard physical characteristics:? Power: 12V / 500mA Power: 6W Temperature:? Working temperature: 0 ~ 55 ℃ Storage temperature: -30 ~ 60 ℃ Relative Humidity: 10 to 90% (non-condensing)